Russian Federation
Snow-ice deposits formed on the outer surfaces of aircrafts on the ground during parking can have a negative impact during take-off due to the deterioration of aerodynamic and flight performance, a significant and even critical decrease in lift, increased drag, blocking controls, difficulty or blocking of landing gear retraction, damage to the blades of inlet guide vanes and/or the blades of an engine compressor. To exclude the influence of snow and ice deposits, anti-icing treatment is performed, including their removal and/or protection from subsequent formation. For this purpose, special anti-icing machines (deicers), equipped with such means of instrumental control as counters of anti-icing fluid pumps, measuring scales of anti-icing fluid tanks, thermometers and pressure gauges for temperature and pressure measuring at the outlet of a spray nozzle, are used. The article deals with the metrological aspects of civil aircrafts anti-icing prior to flight.
aircraft, unity of measurements, metrological support, icing, traceability, anti-icing fluid, metrological risk
1. Doc 9640-AN/940. Manual of aircraft ground deicing/antiicing Operations ground // International Civil Aviation Organization. - 3rd ed. - Montreal: ICAO, 2000. - 52 p.
2. FAP-128. Preparation and performance of flights in civil aviation of the Russian Federation // Order of the Ministry of Transport of the Russian Federation of 31.07.2009 No 128.
3. GOST R 54264-2010. Air transport. The system of maintenance and repair of aircraft. Methods and procedures of antiicing treatment of aircraft. General requirements. - M.: Standartinform. - 2012. - 16 p.
4. Recommendations on antiicing treatment of aircraft / Federal Air Transport Agency of the Ministry of Transport of the Russian Federation, No 03.10-7. - M., 2013. - 65 p.
5. Guidelines for the investigation of aviation events related to aircraft icing / Federal Service for Supervision of Transport of the Ministry of Transport of the Russian Federation, No 8.10-1283. - M., 2006. - 18 p.
6. Davydov N. Antifreeze for Sapsan. Gudok, 2010, 21 Apr.
7. Federal law of 26.06.2008 No 102-FZ “On ensuring the unity of measurements”.
8. GOST R 8.000-2015. The state system of ensuring the unity of measurements. Fundamentals. - M.: Standartinform. - 2015. - 16 p.
9. GOST R 56116-2014. Air transport. Security management system of aviation activities. Metrological risks. Fundamentals. - M.: Standartinform. - 2015. - 10 p.
10. Bogoyavlenskiy A.A. Ensuring the unity of measurements of fuel and oil consumption of power plants in the flight and technical operation of aircraft. Scientific Bulletin of GosNII GA. - 2019, No 25, pp. 7-20.
11. Bogoyavlenskiy A.A. Instrumental control of stock and flow of working fluids in the technical operation of aircraft. Measurements World, 2017, No 4, pp. 17-23.
12. Bogoyavlenskiy A.A., Bokov A.E. Metrological certification of a technique of measurement of a field of temperatures of gases behind the turbine at tests of engines RU-19A-300 after repair. Scientific Bulletin of GosNII GA, 2014, No 4 (№ 315), pp. 86-93.
13. Bogoyavlenskiy A.A., Bokov A.E. Measurements of temperature of gases behind the turbine at tests of aircraft engines after repair. Measurements World, 2014, No 1, pp. 7-14.
14. On the approval of the State verification scheme for measuring instruments of mass and volume of liquid in a stream, volume of liquid and capacity at static measurements, mass and volume charges of liquid. The Order of the Federal Agency for Technical Regulation and Metrology of 07.02.2018 No 256.
15. GOST 8.451-81. The state system of ensuring the unity of measurements. Counters of a liquid chamber. Methods and means of verification. - M.: Publishing standards. - 1982. - 17 p.
16. GOST 8.346-2000. The state system of ensuring the unity of measurements. Steel horizontal cylindrical tanks. Calibration methods. - M.: IPK Standards Publ. - 2001. - 56 p.
17. Annex 19 to the Convention on International Civil Aviation. Safety management. - Montreal: ICAO. - 1st ed., 23.08.2013.
18. Bogoyavlenskiy A.A., Bokov A.E. Setting the task on the development of methods of the management of metrological risks of accidents in aviation activities. Measurements World, 2013, No 10, pp. 3-7.
19. Bogoyavlenskiy A.A. Assessing metrological risks in a safety management system of aviation operations. Intellectual Systems of Measurement, Monitoring, Control and Dispatching in the Industry: coll. papers of the international sci.-tech. conf. - M.: ITE Company; MAI, 2014, pp. 43-47.
